Low Pressure Piston Air Compressor 10 Bar For PET Bottle Blowing Machine
Product introduction of low pressure piston compressor
Low pressure air compressor provides 10 bar high pressure for PET bottle blow molding machine.
Features of low pressure compressor
1.cylindrical direct-flow valve is used by our compressors. The valve is made from the stainless steel belt imported from Sweden and it is free from fracture during the working life.
2.The piston of our air compressor applies the integral cast chromium plating ring, the working life is extended by 3 to 4 times.
3.Shangair’s unique compressor dynamic balancing technology. The vibration is only as a quarter of the world standard.
4.The whole air compressor adopts rolling bearing without bearing shell
5.To ensure safety and reliability of air compressor, redundancy design principle is adopted and multiple protection measures are taken: such as overload protection; overheat protection; phase-failure protection; low-voltage protection; drainage while stop running; startup under the condition pressure is zero.
6.High reliability, long maintenance cycle, very low oil consumption (oil-saving), low energy (power saving), these dramatically reduce the general operating cost of our air compressors.
Parameters of 10 bar compressor
| Model No. | Air Flow
(Nm3/min) | Pressure
(Mpa) | Power
(KW) | Weight
(kg) | Size (mm)
Length×Width×Height |
| W-1.3/10 | 1.3 | 1.0 | 11 | 660 | 1800×860×1600 |
| W-1.6/8 | 1.6 | 0.8 | 11 | 670 | 1800×860×1600 |
| W-1.6/10 | 1.6 | 1.0 | 15 | 680 | 1800×860×1600 |
| W-2.0/8 | 2.0 | 0.8 | 15 | 690 | 1800×860×1600 |
| W-2.0/10 | 2.0 | 1.0 | 15 | 690 | 1800×860×1600 |
Product Tags:
|
|
10 Bar Booster Piston Air Compressor PET Bottle Making Auxiliary Equipment Images
|
